Inland to debut a Vietnam-throwback Advisor M1 pistol

By Editor, Nov 8, 2015 | |
  1. Editor
    Set up to unveil in 2016, likely at the SHOT Show in January, Inland manufacturing is stepping up their M1 Carbine game with a new offering that takes the vaunted little .30 caliber fun gun from WWII into the triple canopy of South East Asia.

    inland-advisor-m1-372.jpg

    What were these guns?

    When the U.S. began their boots-on-the-ground involvement in the Republic of Vietnam (aka South Vietnam) with the establishment of the U.S. Military Assistance Command, Vietnam (MACV) in 1962, the primary focus was to build up the local military, police and militia into a force that could ward off the Viet Cong and North Vietnamese. Originally set up by the French, these forces had a hodge podge of captured WWII Japanese and French weapons.

    To augment and eventually replace these worn guns, the U.S. began shipping boatloads of surplus GI weapons from the states to include M3 Grease Guns, Thompson submachine guns, M1 Garands, BARs, M1919 Brownings and, last but not least, the M1/M2 .30 caliber carbine. As Uncle had officially replaced all these with the M14/M60 and was looking hard at the new AR-15 to become the M16, these were all second-line guns.

    With literally thousands of these laying around South Vietnam, the U.S. advisors sent to train the locals often "acquired" a few of their own which led to a number of all the above in hands of Green Berets and rear echelon guys who quickly converted them to their own needs (which was ok as no armorer was going to come looking for them).

    chopped-m1s-vietnam-374.jpg

    One of the more popular in-theater mods was to take the M1 Carbine, or better yet its full-auto M2 cousin, lop the barrel and/or buttstock off, and use it as a compact room-broom to help break contact in an ambush, clear a fighting position in the middle of the night if Mr. Charles got through the wire, or poke into a tunnel entrance.

    As the conflict evolved and better gear started showing up to include shorty CAR-15s and SW76 K-guns, the chopped M1/M2s faded away-- though undoubtedly are still encountered in some parts of South East Asia today.

    Civilian market runs with it

    Back in the states, about the same time a number of companies that were in the market of making M1s for public consumption using an enormous stock of surplus parts sold by the Army in the late 1950s, hit on the idea to make a M1 pistol. Of course, to get around ATF regulations on short-barreled rifles, they made new pistol-only receivers and fitted GI parts to them, as well as only having one pistol grip and no provision for a stock to remain compliant.

    both-plainfield-and-iver-johnson-made-m1-carbine-style-pistols-in-the-1960s-and-70s-376.jpg
    Both Plainfield and Iver Johnson made M1 carbine style pistols in the 1960s and 70s. These were dubbed "Enforcer" models.

    universalstoegers-375.gif
    Universal also did the same thing through the 1980s.

    I used to own a Universal M1 pistol and, while it worked, the handguard rattled and it suffered from the same complaints that bother AR and AK pistol designs: huge fireballs due to unburnt powder, and limited use at long range. However, it did make one intimidating truck, house, or boat gun that was capable of stowing in a small space and deploying with a serious caliber when needed.

    Now they are making a more genuine come back.

    Enter Inland

    Based in Dayton, Ohio, MKS Supply is the company behind Hi Point and Chiappa. Last year they have teamed up with a reborn Inland Manufacturing (Facebook) to market a series of M1 Carbines that are almost identical to the ones carried by the GI's of WWII. Like the war babies, they are 100 percent U.S. built from U.S. parts (just like Hi-Points are). They even contain the same arsenal-stamped cartouches stock markings and 1944-style battle sights.

    These guns, in fact, are so near to their predecessor that the press release from the company states, "The new Inland carbines are so precisely copied from the original specifications that the company marks the underside of the barrel and the inside of the stock of these current models to prevent potential fraudsters from passing these new carbines as mint WWII originals."

    Moreover, the new Advisor model picks up where those guns left off on an evolutionary line.

    inland-1-377.jpg

    "The M1 Advisor is a pistol that is features a 12 inch threaded barrel with flash hider weighing in at lbs. 8oz. The Advisor will ship with one 15 round magazine and a standard M1 carbine sling," says a post on Inland's page this week.

    inland-3-373.jpg
    inland-378.jpg

    The wood looks like their classic M1A1 Paratrooper model, sans folding stock, which is about right for the design. Plus the flash-hider, which neither the old-school Plainfield, Universal and Iver-Johnson M1 pistols had, is a nice improvement.

    Price point is TBD but could prove interesting.

    Share This Article

Comments

To view comments, simply sign up and become a member!