Hi-Point Firearms Forums banner
1 - 1 of 13 Posts

· Registered
1,538 Posts
Contrary to what Beemiller recommends I would give the gun a thorough cleaning and then look at polishing the feed ramp. Would also do the same for the mags and pay a little extra attention to the follower to get the sharp edges off and the sharp edges out of of mag body as well.

My guess is the gun is a bit rough inside and will need some TLC or more range time for it to settle in. Another option is contact Beemiller and send it back so they can do the TLC and make it right.

My 995 came out of the box shooting with no problems at all. I did buff and polish my mag follower and the inside of the mag body, then gave the rifle a good cleaning to remove the heavy preservative oil the factory put on prior to assembly.

1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.