Hi-Point Firearms Forums banner
1 - 12 of 12 Posts

·
Long Arm of the Law
Joined
·
631 Posts
Discussion Starter · #1 ·
Anyone know of a supplier of these?
 

·
Registered
Joined
·
88 Posts
are the compensators listed there just for the 995 or do they fit the pistols too?
 

·
Premium Member
Joined
·
1,186 Posts
Keep in mind that the C9 Comp includes the compensator; the 995 doesn't (and, of course, the compensators are very different). Without asking Shirley -- which I suggest you do -- I'd suspect that a missing C9-COMP compensator would be a free replacement, while a 995 compensator would be replaced only if you have a defective one. YMMV.
 

·
Registered
Joined
·
222 Posts
I spoke on the phone with them today and was told explicitly that the compensator from the 995 does not fit on the C9 Comp barrel. You can buy the compensator for the 995 from the site or over the phone thru them. I too think that the compensator for the C9 comp is a warranty replacement part. They do not sell them seperately and they do not fit on the other pistols. There is a 380 Comp and a C9 Comp and she told me that they are completley different guns than the CF-380 and the C9. I had originally called her to try to get a barrel for the C9 Comp to replace the barrel I have on the C9 so that I could try to mount the 995 compensator to the C9 Comp barrell. She said No and No. So I would save your money. Although she did tell me that I should be able to find a used C9 Comp if I tried hard enough. So that is my new plan. Hope that helps you.
 

·
Long Arm of the Law
Joined
·
631 Posts
Discussion Starter · #8 ·
Pretty much answered my question.

Thanks
 

·
Registered
Joined
·
222 Posts
Be jealous of my c9 comp
I am too da** it. You can put my address down on that box next time. JK
 

·
Registered
Joined
·
5,757 Posts
What does the compensator exactly do? What are the main differences between the c9 and c9comp?
It is meant to counteract muzzle flip by redirecting the energy of the spent gasses upward. It also adds a little weight to help accomplish this, and it gives you about1/2 in of added barrel length.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top