Is it possible to put a wood stock on a 4095?

2354 Views 15 Replies 10 Participants Last post by jrskydawg68, Oct 25, 2009

High Tower

Discussion Starter · Aug 24, 2009

I had my 4095 at the range today and it was hot and I was out in the sun for a good couple of hours and I noticed that I could bend the stock at the end of the receiver on top more so than when it is in a cooler temperature. Kind of had a bendy feel to it so you could see a visible gap between the stock and receiver. Got me to thinking that a wood stock would solve that problem. If weight was a concern a guy could do a cut out of the butt stock like the Tabuk AK. It is possible to mount a wood butt stock to the 4095 or 995 for that matter?

1 - 16 of 16 Posts

Silicon Wolverine

· #2 · Aug 24, 2009

as far as anyone around here knows, no wood stocks have ever been made for the 995 or 4095. youre stuck with what you have as te ATI doesnt fit the 40 either.

SW

High Tower

Discussion Starter · #3 · Aug 24, 2009

Hey cool, you're from Mobridge. I kind of figured that but I wonder if a guy could adapt a stock to fit? I'll have to take my apart and see what the stock looks like where it goes into the receiver. Thanks for the reply.

Pistol Pete

· #4 · Aug 24, 2009

I say GO FOR IT ! Think of the options if it works and the personalization that could be done.

SamStafford

· #5 · Aug 24, 2009

If you have some wood working skills...I say go for it. Try making a stock out of two 2x4s. Let us know if you do make one. :yes:

my05hammer

· #6 · Aug 24, 2009

If you have some wood working skills...I say go for it. Try making a stock out of two 2x4s. Let us know if you do make one. :yes:

Do not pine. Use a fine wood like oak, cherry, or walnut. I have no idea how to make something like this, but I do believe that if you were to make it out of 2X4's these nicer woods can be purchased in oak or walnut at Menard's.

SamStafford

· #7 · Aug 24, 2009

I'm sorry, I meant was to start out on cheap wood first. I would hate to mess up a nice piece wood.

Silicon Wolverine

· #8 · Aug 24, 2009

the biggest problem is locating things like the magazine release, trigger pins etc in a wood housing. unless you chopped up the original stock to retain the pistol grip housing for all these critical components, al of that would have to be built into the wooden part.

SW

Pistol Pete

· #9 · Aug 24, 2009

I'm "guessing" he meant leaving the handgrip and cutting it off at the back of the receiver and just replacing the shoulder stock ???????

SamStafford

· #10 · Aug 24, 2009

Pete, I was just thinking that same thing. Hmmmmmmm........................ :thinking:

theqbn

· #11 · Aug 24, 2009

A wooden stock on a hi-point would be truly epic. I would love to see this.

Beowolf1911

· #12 · Aug 25, 2009

I always wanted to cut the forearm off my 995 and mount a thompson 1928 style front pistol grip. until I sold my 995 to huggy :'(

High Tower

Discussion Starter · #13 · Aug 25, 2009

Great response guys. I was thinking of just replacing the rear stock and leave the pistol grip. The front lower handguard would be another one to consider replacing. I needed a project to work on so this just fits the bill.

-dW

· #14 · Oct 22, 2009

I'm sorry, I meant was to start out on cheap wood first. I would hate to mess up a nice piece wood.

yeah, that stuff doesn't grow on trees you know..

SteveD

· #15 · Oct 24, 2009

Instead of a solid wood stock, could you cover a old style stock in veneer? Does anyone have a old stock they want to sacrifice??

jrskydawg68

· #16 · Oct 25, 2009

I have and old SKS stock that is my new project. I will post pics during the project.

1 - 16 of 16 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.