[CulperRing]

A few questions about the L25:

What is the difference between the L25 and L25T? Is it the frame? the slide? Both?

I rebuilt a L25 and I was very happy with the accuracy but the slide got hung up after every shot. I am thinking it is the recoil spring. I saw on ebay someone selling Raven recoil springs that they said would work for the L25. Is that correct? Anyone use a Raven recoil spring?

Thank you in advance.

 

[Jim_Sterling]

Ive got Sterling & Galesi springs if you measure yours. Its probably not the spring, the internet gun lore is eaten up by Wolfspringitis because theyre cheap & easy to replace. I would really clean it & oil it up & try again. these 25's dont have high round counts it may not be broken in.

 

[adam01364]

What is the difference between the L25 and L25T? Is it the frame? the slide? Both?
Anyone use a Raven recoil spring?

Sorry, I totally missed this post.
The Lorcin L25 has a Zamak from. The Lorcin LT25 has an aluminum frame, Lorcin made it to get around melting point laws.

You can use a Raven recoil spring as well as a Raven firing pin spring on a Lorcin.

 

[here]

I have been working on Lorcin l25 and raven p25 plus the Sundance a25 I have them in beta now also got kits for really cheap

kits where?

 

[adam01364]

@Frytech where are you getting kits?

 

[RACHGIER]

@Frytech where are you getting kits?

He's advertising as a seller and violating forum rules by doing so and trying to poach members to join his group.

 

[moona11]

He's advertising as a seller and violating forum rules by doing so and trying to poach members to join his group.

Wonder if they love to shoot over there?

 

[adam01364]

Only the wittle tiny pew pews.

 

[CulperRing]

Sorry, I totally missed this post.
The Lorcin L25 has a Zamak from. The Lorcin LT25 has an aluminum frame, Lorcin made it to get around melting point laws.

You can use a Raven recoil spring as well as a Raven firing pin spring on a Lorcin.

No problem. Thank you for the information. Will have to take the L25 out again sometime (probably try a Raven spring). Just rebuilt a L380 (was surprised by the accuracy, at I think 10ft--LOL!). Have another 380, that 2 Lorcin slides would not fit (Cobra ones would not work either)!

 

[adam01364]

Have another 380, that 2 Lorcin slides would not fit (Cobra ones would not work either)!

Wow that's bizarre. But come to think of it, I once had a Davis .380 barrel from a parts kit that wouldn't fit into any of my frames.
Lockheed has their Skunk Works for top secret projects, and I think some SNS manufacturers had their own skunk works for stinky parts "git 'er done -somehow" LOL