Hi-Point Firearms Forums banner

Safe Spray Cleaner for Carbine Stocks

1265 Views 10 Replies 8 Participants Last post by  uncle mark
What spray cleaner does everyone use on their High Point carbines? I've got some Birchwood Casey Gun Scrubber but it says it may harm synthetics. Thanks.
1 - 11 of 11 Posts
Water and soap?
  • Like
Reactions: 2
I don’t understand.
Clean? The stock? Why?
  • Like
Reactions: 2
What spray cleaner does everyone use on their High Point carbines? I've got some Birchwood Casey Gun Scrubber but it says it may harm synthetics. Thanks.
OK, I'm guessing that you're not really wanting to clean the stock, you're just wanting a gun cleaner that won't harm the stock.

Most of them will do just fine. Breakfree CLP (which I like), RemOil (which I hate), Ballistol (which I love the smell of), Hoppes, even "Ed's Red" will all work just fine for you. Pretty much any standard gun cleaner/oil should be OK.

Peace favor your sword,
Kirk
  • Like
Reactions: 1
OK, I'm guessing that you're not really wanting to clean the stock, you're just wanting a gun cleaner that won't harm the stock.

Most of them will do just fine. Breakfree CLP (which I like), RemOil (which I hate), Ballistol (which I love the smell of), Hoppes, even "Ed's Red" will all work just fine for you. Pretty much any standard gun cleaner/oil should be OK.

Peace favor your sword,
Kirk
Thanks. You're exactly right, I don't want to "clean the stock", just the action, barrel etc. I appreciate your reply.
  • Like
Reactions: 1
I'll second the Break Free CLP. Works great!
  • Like
Reactions: 2
Hoppe's #9!! I use it for aftershave, as well as a gun cleaner
  • Like
Reactions: 4
Thanks. You're exactly right, I don't want to "clean the stock", just the action, barrel etc. I appreciate your reply.
I use ATF and engine oil for....all my guns.
  • Like
Reactions: 1
I use ATF and engine oil for....all my guns.
And your wife is OK with that? Huh.
  • Like
Reactions: 1
I use windex on the plastic stock
  • Like
Reactions: 2
I like to spray the inerds with Hornady One Shot. Swab the feed ramp with a Q-tip and run a bore snake thru the barrel. Easy peasy.
  • Like
Reactions: 1
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top