Slide wear.

Discussion in 'Vintage Topic Archive (Sept - 2009)' started by fattie, Mar 1, 2008.

  1. fattie

    fattie Guest

    well , ive put about 130rds through my c9 , and last night i was playin around with it , unloaded of course and i locked the slide back and noticed that there was 2 little raised lines.

    one on each side of the rear inside of the slide , one of them sheared off. i wish i had a digi cam to show you. i put a few more rounds threw it today and havent noticed any problems. has anybody elses hp's worn like this ?
     
  2. BSK

    BSK Guest

    I noticed that other day that the slide can be "wiggled" from side to side ( left to right) so the slide has some play in it
     

  3. Ari

    Ari Guest

    I would like to see photos. Is this on the roof of the slide?
     
  4. 1inthechamber

    1inthechamber Member

    290
    0
    If it's the same area I'm thinking, it should be normal wear where one side of the slide is down to bare matel on the little raised lines.
     
  5. fattie

    fattie Guest



    yes , exactly right. one side is bare , the other still has the line. so its normal ?
     
  6. 1inthechamber

    1inthechamber Member

    290
    0
     
  7. fattie

    fattie Guest

    sweet , im gunna put another box through it today.