Hi-Point Firearms Forums banner
1 - 7 of 7 Posts

· Super Moderator
Joined
·
10,711 Posts
Discussion Starter · #1 ·
I used to be a Taurus fanboy. They were (are) real working man’s guns. They did get some bad reviews, but I think a lot of that was just snobbery. I really never had any issues with them except for a 22 revolver that had really tight tolerances and had to be kept spotless clean or the cylinder would bind, a problem a local gunsmith fixed by shaving the cylinder. But back to the semiautos.

All of my semi autos were of the Millennium family. They were either 45 acp or 380 acp. Also had a 24/7 45 acp. Never a hitch with mine. I did eventually buy a 709 slim, no problems with it either, but the trigger and grip just did not suit me. I constantly shot it low / left. Again, nary a hitch with reliability. Unfortunately I traded off my beloved Taurus pistols when the Taurus class action lawsuit was going on.

I got into some local 3 gun "run and gun" matches sponsored by a local church and wanted a higher capacity handgun. 9mm was the obvious cartridge, and I always wanted a M9. The price was out of the question though, so I turned to Taurus and their PT92. Still a but over budget so I turned to the Taurus P9 ((?). Really can not remember the name, but it was the forerunner to the TH9 I am talking about.) Yep, I ran 3 gun with a H&R Pardner Pump Protector, a DPMS Sportical, and the Taurus. Never did I win, but I was able to play the game, limiting factor was the shotgun, it just did not hole enough rounds. While everyone else was shooting, I was reloading.

Anyways, back to the Beretta 92. Beretta is having a $75 rebate. I thought this just might be my time for a 92. I went to my favorite Distributor, Davidsons, and priced them. Of course I revisited the Taurus PT92 as well. While looking at the Taurus offerings I again ran across the Taurus TH9.

The TH9 is a full size 17 +1 polymer, hammer fired semi-automatic pistol. It can be carried DA / SA like the M9, or cocked and locked like my favorite, the 1911. The double action trigger was smooth and heavy, while the reset was quick and the single action trigger was about 5-6 pounds but crisp. In single action 1911 mode, the trigger was basically dead until you hit a wall then it was the slightly heavy but crisp trigger with a quick reset. The others in the group I shot with called it "the sleeper". A name given to my pistol because it was a lot of value for the money there.

No, I am not going to run out and buy it. There might be a M9 or PT92 in my future, but imam really pretty well set with my current crop of 9mm pistols. But if I were really in the market for a full sized pistol, the TH9 would certainly grab my attention. Pricing at dealers in my area was between $300 and $350.
Air gun Trigger Gun barrel Gun accessory Metal
 

· Registered
Joined
·
5 Posts
Curious now,
I've always liked Taurus firearms, very good quality for the price, however as a ex gun store owner found their warranty service to be pathetic. Any one with current warranty experience?
 

· Administrator
Joined
·
28,428 Posts
Curious now,
I've always liked Taurus firearms, very good quality for the price, however as a ex gun store owner found their warranty service to be pathetic. Any one with current warranty experience?
Roughly 5-ish years back, I had to send back a G2C for repair (the trigger dingus broke). Taurus fixed it but it seemed like it took a long time.

I sold it at the beginning of COVID lockdowns. I have since replaced it with a GX4.

Peace favor your sword,
Kirk
 

· Registered
Joined
·
5 Posts
Yeah, same here, I mean months on end, the worst was a sweet little 22 pump, (still have it) it was the final replacement for one sent back for repair, as I recall it was 8 or 9 months before they sent a replacement.... with a bent barrel, returned that, waited more months and they finally sent the one I kept. There were others, that was just the worst but all took extraordinarily long time.
 

· Super Moderator
Joined
·
10,711 Posts
Discussion Starter · #5 ·
My complaint with Taurus was buying parts. They pretty much wanted you to send everything in, then it took weeks or months to get it back.

I only have a few Tauri now, a PT22 Poly, GX4, TX22 (x2) and a revolver. Never had to send them in, but I have bought upgrades to my GX4 and TX22, plus a few magazines. They ship from Georgia now. They are fast.
 

· What the Hell was that?
Joined
·
890 Posts
I used to be a Taurus fanboy. They were (are) real working man’s guns. They did get some bad reviews, but I think a lot of that was just snobbery. I really never had any issues with them except for a 22 revolver that had really tight tolerances and had to be kept spotless clean or the cylinder would bind, a problem a local gunsmith fixed by shaving the cylinder. But back to the semiautos.

All of my semi autos were of the Millennium family. They were either 45 acp or 380 acp. Also had a 24/7 45 acp. Never a hitch with mine. I did eventually buy a 709 slim, no problems with it either, but the trigger and grip just did not suit me. I constantly shot it low / left. Again, nary a hitch with reliability. Unfortunately I traded off my beloved Taurus pistols when the Taurus class action lawsuit was going on.

I got into some local 3 gun "run and gun" matches sponsored by a local church and wanted a higher capacity handgun. 9mm was the obvious cartridge, and I always wanted a M9. The price was out of the question though, so I turned to Taurus and their PT92. Still a but over budget so I turned to the Taurus P9 ((?). Really can not remember the name, but it was the forerunner to the TH9 I am talking about.) Yep, I ran 3 gun with a H&R Pardner Pump Protector, a DPMS Sportical, and the Taurus. Never did I win, but I was able to play the game, limiting factor was the shotgun, it just did not hole enough rounds. While everyone else was shooting, I was reloading.

Anyways, back to the Beretta 92. Beretta is having a $75 rebate. I thought this just might be my time for a 92. I went to my favorite Distributor, Davidsons, and priced them. Of course I revisited the Taurus PT92 as well. While looking at the Taurus offerings I again ran across the Taurus TH9.

The TH9 is a full size 17 +1 polymer, hammer fired semi-automatic pistol. It can be carried DA / SA like the M9, or cocked and locked like my favorite, the 1911. The double action trigger was smooth and heavy, while the reset was quick and the single action trigger was about 5-6 pounds but crisp. In single action 1911 mode, the trigger was basically dead until you hit a wall then it was the slightly heavy but crisp trigger with a quick reset. The others in the group I shot with called it "the sleeper". A name given to my pistol because it was a lot of value for the money there.

No, I am not going to run out and buy it. There might be a M9 or PT92 in my future, but imam really pretty well set with my current crop of 9mm pistols. But if I were really in the market for a full sized pistol, the TH9 would certainly grab my attention. Pricing at dealers in my area was between $300 and $350.
View attachment 77714
I was looking at one of those when they first came out and almost got it, but I found a PT99 for about $75 less and it came with 3 magazines. I got no regrets. I’m actually a big Taurus fan. Lol. I just recently picked up an older one in .45acp.
 

· Registered
Joined
·
6 Posts
I have a few Taurus firearms, with the exception of one, which is ammo picky, the rest work well. Very reliable. My brother just picked up a very lightly used (like new) TH9C (the compact version). Seems to shoot well and seems reliable thus far.

As for experience with their customer service/warranty, I had to send in a PT 738 TCP last year around this time. The trigger went dead at the range. They had it back to me repaired in two weeks, to my utter surprise. During this time I had waited 6 months for a Beretta to come back from the factory and they had to replace my firearm. Hell of a contrast.

Anyhow, I think those TH9/TH9C guns are cool, I would have purchased this gun my brother bought if he didn't pick it up.
 
1 - 7 of 7 Posts
Top