Hi-Point Firearms Forums banner
1 - 20 of 1807 Posts

·
Premium Member
Joined
·
3,079 Posts
Discussion Starter · #1 ·
Like the "What did you buy?" thread but without the buying!

This thread will give you a shot (pun intended) at showing off the hardware you took with you to the range, rather than some fancy unfired safe queen you just got out of gun jail.

Here's what I took out:

I.O. Inc AK47
 

Attachments

·
King of you Monkeys
Up down
Joined
·
19,882 Posts
Beeman rabbits in the yard refused to move out after I told them the leave. Mom and Dad are now being eaten by the neighborhood cats. Babies next.
 

Attachments

·
Registered
Joined
·
111 Posts
My wife, son and grand daughters shot these......before the friggin cloud burst hit the Sunshine state!
 

Attachments

·
Administrator
Joined
·
24,784 Posts
I had the bow out again this afternoon. Put in some more close up work at 20 yards to focus more on form and muscle strength.
 

·
Premium Member
Joined
·
4,848 Posts
SD9VE - New handload w/ 800X. BUT - mOOnzie!!!I'm still nose-diving rounds!! I'm pushing the [email protected] gun and it'd drivin' me nutzer than I already was.


Did better with this


and MUCH better with this
 

·
Just a Man
Joined
·
14,185 Posts
Just got out with the S&W 669... 50 rds of Federal Aluminum, 10 rds of Remington hallow points.... Are em all up... I'm shooting a bit low and right, very consistently, not sure if it's me or it yet..... But it's close enough for dirty work. Groups as well as I shoot. Not nearly as snappy as I figured, very pleasant to shoot, just a little slower on follow ups than my full size PT92...
Very happy with it Air gun Trigger Gun barrel Gun accessory Composite material
 

Attachments

·
Premium Member
Joined
·
754 Posts
Ingrams MAC 11 w Lage Mfg. max 11 upper



And a MAC 10 with a suppressor.



These were both full auto. Very cool and my first experience with open bolt autos. Dude that owned them gave me 3 rounds in the first mag of the MAC 10 and said if I can fire just two and not the third he'd let me have more in the mag. On my first try I fired just two. Pretty tough on a smg firing about 900 rpm! Without the suppressor he said it's more like 1300!
The Lage upper on the MAC 11 brings it down to around 600 rpm. The sights, stock and low(er) RoF made it quite a bit more fun to fire.
Probably put 100 through each. Gotta say the open bolt system takes a bit to get used to.
He also had a suppressed USP .45 and a suppressed M9. I liked the USP better as the can on the M9 obscured the sights too much.
 

·
Premium Member
Joined
·
1,293 Posts
Went down to the range after work to unwind a little. Took the Beretta 92S and RIA 1911. Put almost 200 rounds through the 92S and 150 through the 1911.

 

·
Premium Member
Joined
·
2,676 Posts
I just got done at the indoor range. Took the Boberg XR 45, the Kahr CW9, the Xdm sub 9 and M&P 15-22.
 

Attachments

·
Premium Member
Joined
·
3,079 Posts
Discussion Starter · #12 ·
Went down to the range after work to unwind a little. Took the Beretta 92S and RIA 1911. Put almost 200 rounds through the 92S and 150 through the 1911.

That 92S is in great shape. Did you get it through Southern Ohio Gun? My buddy thought about getting one through them but was hesitant since they're surplus guns.
 

·
Premium Member
Joined
·
402 Posts
I just got done at the indoor range. Took the Boberg XR 45, the Kahr CW9, the Xdm sub 9 and M&P 15-22.
How do you like your S&W M&P 15-22? I've been thinking about purchasing one!
 

·
Premium Member
Joined
·
2,676 Posts
Man I love it!!!

I now have 2 ea 25rd mags and an aftermarket 35 rd mag. Fun fun fun!!
I'm using the iron sights, but I would like to get a little 4x red dot for it. I have had zero issues. It eats anything I feed it. Take down is just like an AR. The controls are AR. It's just lighter and the mags are a bit longer. The 35 Rd aftermarket mag doesn't hold last Rd open, but that's the only issue. I strongly recommend getting one
 

·
Premium Member
Joined
·
1,293 Posts
That 92S is in great shape. Did you get it through Southern Ohio Gun? My buddy thought about getting one through them but was hesitant since they're surplus guns.
I got it from Classic Firearms back when they had them. It's in pretty good shape and has a lot of life left in it.
 

·
ROLL wif Da MOLE!
Joined
·
25,978 Posts
Lemme see, 6 guns, 5 of my own and Reaper's target Mark3 Ruger;)
Shot the 4595D (D for Drum!) 2 Full Drums, one mixed steel and
brass, 56 rounds of semi-rapid fire PERFECTION, TMF ROCKS!!!
8-9 yds and it was 1 big hole and a few flyers. Rapid Fire, I was
pulling the trigger as soon as the sights crossed the X ;) Had a
good rhythm going.

LOTS of rounds thru the NIB Kimber Pro CarryII and the ONLY
hiccup was that it did not like the drum mag I hooked it up to.
Had about 5-6 nose down misfeeds, but I was able to blip the
knob on the drum and the rounds straightened up, and the slide
went into battery and cycled. IMO the Kimber likes a nose UP
orientation, and the drum is just a bit too flat... With the K-Mag
and the 8 round Promag for 1911, it was perfect every time.
28 in the drum, 40 in the 1911 mags, call it 78 rounds, and
it was pretty much POA for the shooting! I was shooting EVERYTHING
"rapid fire" as I had limited time and lots of shooting to do. ~125 rounds
of 45 ACP downrange :D great day with that alone! :dance:

Shot my CAI milled receiver Draco, awesome as usual, Reaper shot
3 thru it and I shot 37, one whole mag, and Reaper's ex-neighbor's
son, Xavier shot the last 20. He's 12 and a very good shot, when he
takes his time. He was shooting Reaper's 10-22 Tapco stock Ruger,
with an RDS. He shot 8/10 steel coupon targets, 6/6 once he slowed
down and actually aimed. Did a nice pattern with the Draco too,
@ 13-14 yds.

G20 with the new LWD 6.6" barrel, 10mm, did pretty well, 8-9yds,
but not as good as the comped barrel and the Buffalo Bore
"OVERKILL" 220gr, 1200 FPS hardcast lead ammo :eek: That
was 10 yards, about a 6" group, and the 8-9yd pattern was
maybe a tad bigger with HPR Hyper-Clean ammo. The gun
was easy to clean :rofl: 180gr @

Ballistics:
Part #: 10180FMJ
Projectile: TMJ
Weight (Grains): 180
Casing: New HPR Brass
Muzzle Velocity (fps): 1264
50Yd Velocity (fps): 1142
Muzzle Energy (ft.lb): 639
50Yd Energy (ft.lb): 521
This is true, full power 10mm Auto, just a tick under the
Buffalo Bore, @ 220gr and 703ft/# ME :eek: :D
The gun felt more controllable by a LOT, but the barrel
is brand new and once again, rapid fire. I could have exploded
15 :zombie: Heads in 20 seconds, if I had too! :mad: ;)

Suck it Moonzy, I shot over 200 rounds today :p
:rofl: I was shooting 3-4 days a week at home, until the
cop's wife got whack about letting her kids out when she
hears gunshots... you know that story. :p
 

·
Premium Member
Joined
·
402 Posts
Man I love it!!!

I now have 2 ea 25rd mags and an aftermarket 35 rd mag. Fun fun fun!!
I'm using the iron sights, but I would like to get a little 4x red dot for it. I have had zero issues. It eats anything I feed it. Take down is just like an AR. The controls are AR. It's just lighter and the mags are a bit longer. The 35 Rd aftermarket mag doesn't hold last Rd open, but that's the only issue. I strongly recommend getting one
Thanks for the feedback! I am buying one tomorrow off of Arms List! Really good deal with 3-25 round magazines! Thanks again for the information!

Update: Here is a picture of the one I bought today! Came with 3-25 round mags! I added the sling and angled foregrip! Thanks again for your info!
 

Attachments

1 - 20 of 1807 Posts
Top