not bad at all. be careful welding, you don't wanna warp the barrel.

 

WoW! Pretty!

eldar

 

Looks sweet! I've never painted a gun, but might change my mind and do something with my mossy. What kind of paint did you use?

 

Looks sweet! I've never painted a gun, but might change my mind and do something with my mossy. What kind of paint did you use?

First I used Krylon fusion Primer( its a rattle can made for plastic). Then camo spray paint, i think Krylon brand or Rustolium. This stuff is pretty tough very little wear and no flaking. It has about 1000 rounds through it since the paint.

 

Thanks! I like the detail of leaving the mag release knob black. Nice touch!

 

i have recently bought the same firearm. what did you use to cut the polymer and what is the length of the hand guard now

 

when you say 702, did you put the tactical furnture on it? if so where does one get it. i have a 702 would love to put in the tactical stock.

 

The tactical furniture is from ATI, and comes on that model. I don't know it you can buy it separately. Contact them.

 

I would order me a barrel adapter instead of welding tacticool22 has them

 

I have one that is where i get all my stuff for my mossy

 

when you say 702, did you put the tactical furnture on it? if so where does one get it. i have a 702 would love to put in the tactical stock.

Pretty sure he meant 715t...probably a typo.

 

Pretty sure he meant 715t...probably a typo.

The 715T is nothing more than a 702 Plinkster in an ATI tactical stock set, that's made for it.

 

Yep.......that's true...

 

There's a YouTube video somewhere of a guy fitting a 702 into a tactical-style Airsoft stock.

 

Hey Kevin, that looks awesome! I just picked one up for myself this week and I was already thinking the same thing with the long forearm. What I'm wondering is how many holes you ended up with in the rails. Did you remove the middle screw altogether, or are there still 3 on each side?

 

The 715T is nothing more than a 702 Plinkster in an ATI tactical stock set, that's made for it.

The 715t were originally called the 702, even though they had the tactical shell on them. I believe the name changed to the 715t when they brought out the Flat Top model (which is the one I have)

 

The 715t were originally called the 702, even though they had the tactical shell on them. I believe the name changed to the 715t when they brought out the Flat Top model (which is the one I have)

I believe you're correct. Mine is the carry handle model and is marked "MOSSBERG INT'L 702 PLINKSTER". The Ser.# EJF311XXXX. The Butt stock is also marked ATI.

 

Hey guys I'm new to these forums. I am going to try to convert my carry handle into a flat top using an airsoft polymer upper to make a sort of AR saddle mount which will give me a clean look as opposed to that youtube butcher job. I'm pretty good with tools and I have a whole shop to work in. If all goes well I'll post a how to.

 

Hey guys I'm new to these forums. I am going to try to convert my carry handle into a flat top using an airsoft polymer upper to make a sort of AR saddle mount which will give me a clean look as opposed to that youtube butcher job. I'm pretty good with tools and I have a whole shop to work in. If all goes well I'll post a how to.

I would be interested in that.

 

here is a guy who cut the carry handle off his 715t

http://mossbergowners.com/viewtopic.php?f=88&t=6255

There have also been people who have sent their carry handle 715's back to Mossberg for service and requested the Flat Top shell, and have recieved their rifle back in the Flat Top plastics

 

I'm looking for a similar look to a shotgun saddle and I think he cut too much off the front sight. Also found an airsoft stock in dark earth that will fit the tube and matching rubber rail covers. I'm going to cut the front post down and have a low profile rail riser to extend over the hole.

 

The stock is G&G airsoft and it does not wobble as a matter of fact its snug. Rubber rail covers I'm just waiting for my magpul mbus and flat top rail riser and the front sight is coming off

 

It took about an hour with a hand saw. I'm gonna get a longer rail riser for the receiver so it covers end to end but its solid. Range to sight it when my red dot comes.

 

Doesn't look like the rails line up. Do you need a riser for the front site?

 

they sit about 1/2 inch higher than the front which is ok the stock rear sight was all the way up when i had it zeroed because that front post was really high. shouldn't be a problem at 50 feet using the mbus. my 2x magnified red dot couldnt zero at 300 feet because it was too high on the carry handle. 1235 fps the sweet spot is 50 feet winds up zero at 300 as well. worst case I throw a 1/2 riser on the front.